Industrial use of horizontal centrifuge most has a headache is one thing, is horizontal centrifuge in chemical raw materials for a long time use, horizontal centrifuge corrosion problems encountered, now give you recommended 4 to prevent or slow down the corrosion of horizontal centrifuge four measures.

First, the selection of the material of the horizontal type of centrifuge is very important because of the different materials and separation requirements, need to use different models. Models and main parameters are determined, according to different materials in different environments of corrosion resistance, comprehensive physical and chemical characteristics of J, cost and other factors, from the basic plane to determine the strength of parts. From the point of view of the material itself, it is safe for the target material.

Second, the mechanism design of horizontal centrifuge, a good design can prolong the service life of the equipment, ensure the safety of the device, for structural design, most likely to accelerate corrosion defects is stress concentration tendency and crevice environments, sometimes despite the immersion of metals in solution, corrosion rate is low; but the formation of cracks, due to a change in the internal solution chemical and electrochemical conditions will cause severe crevice corrosion.

Third, horizontal centrifuge surface protection measures

One of the basic ideas to control corrosion is to cut off the corrosion environment. In the design of horizontal centrifuge is often used surface treatment methods, such as flange, zinc plating, chrome plating, chemical plating method. These methods in many environments is effective, but for rotating parts, must pay attention to an important phenomenon: the substrate material and the coating is two kinds of materials, the coefficient of linear expansion is different, will be in the rotating elastic deformation produced different deformation, resulting in a large number of micro cracks; if the existence of the above phenomenon, will accelerate the formation of corrosion. Therefore, the surface protection method for rotating parts should be used with caution.

Fourth, the use of corrosion inhibitor horizontal centrifuge itself involves many disciplines, to use a good horizontal centrifuge, in addition to some of the above measures, but also should pay attention to the study of its application environment. Application of corrosion inhibitor, in practical application, it is also widely used. For some harsh environment, the use of appropriate corrosion inhibitor can make parts to achieve the degree of application, as long as the process permits, the use of corrosion inhibitors, it should be a effective way to the application of horizontal centrifuge. Through the above 4 points can be a very good protection of the horizontal centrifuge, more resistant to corrosion, so that the use of horizontal centrifuge longer, more secure.

Taizhou Beili Machinery Co., Ltd. is a set design, development, manufacturing, sales and service in one of the professional engaged in various types of automatic bar cutting machine and red punch automatic feeding machine of innovation oriented enterprises, the company to rely on strong research and development advantages, the independent development of the automatic cutting machine, and has made a number of domestic patents, products are exported to many countries. Since the establishment of the company adhere to the quality as the foundation, with advanced design concepts and strict management attitude, to create the greatest value for customers.